![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061033.webp)
CPP100
SECTION 6
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
6.1
Operation
GENERAL
S N E L L & W I L C O X
C P P 1 0 0
HOME
PRESET
BACK
FREEZE BYPASS
REC
TRANS
MEDIAN SPATIAL
LINEAR SCRATCH ENHANCE
SETUP
MEM
CONFIG
NET
PATTERN
MON
INPUT
GLK
FILTERS
PICTURE
PREFIX
SELECT
All operational parameters and selections are made using a system of menus as shown in the previous
section. A guide to controlling the PREFIX and what the operational parameters and selections do can be
found in this section.
The PREFIX may be controlled by a number of different means:-
- Local front control panel,
- Remote “Shoe Box”
- Computer Interface
- Card Edge Control (not available on –G version)
When using a Remote “Shoe Box” or the computer interface, communication is via a wired network system
called RollCall
. Several units may be controlled using this system. Further details can be found in section 7
and the “Shoe Box” operation manual.
If the PREFIX is fitted with a decoder card ( top slot ) the unit may be controlled by using the interface fitted to
this card. This interactive user interface consists of a high contrast 8 character display and a bank of four push
button switches, both of which are accessed by opening the front panel. Further details of this method of
control can be found at the end of this section.