CPP100
SECTION 8
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
8.5
On Fail
This sets the default mode for the unit when the input signal fails.
SDI B / Video (Comp I/P) / Freeze (SDI I/P) / Message /
Black / EBU Bars / Y Ramp / UV Ramp / Y Sweep /
UV Sweep / Bowtie / Full Bars
Panel Display
RollCall™ shoebox panel display information: Normal, Recursive,
Median, Spatial, Linear, Scratch, Enhancer, EDH Check, Network, Auto
Loop
On Screen Display
On screen status display using Monitor output
None, System, Filters, Decoder
Memory
Store: User defined memory Slots 1-8
Recall User: User defined memories 1-8
Recall Preset: Recall preset memories or Factory
Set name: Set Memory Name (user defined ) 1-8,
10 characters ASCII character set.
Company policy is one of continuous product improvement. Specification is subject to change without notice.
