![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061020.webp)
CPP100
SECTION 2
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
2.3
Digital Outputs
These are the SDI outputs from the unit via BNC
connectors. They are component digital outputs, all of
which can be used simultaneously.
The interface is in accordance with SMPTE 259M-C
ITU recommendation BT.656-3
The Program output carries processed video.
The monitor output carries processed video, and if
selected, the on-screen display.
Note that Error Detection and Handling (EDH) is only
implemented on the
program
output.
Note
To aid compliance with EMC/RFI regulations, we
recommend the use of high quality co-axial cable
type BBCPSF1/2 or equivalent.
Remote Control
Interface to the "RollCall" communications network is
via the single BNC connector labelled Serial Net.
Connections should be made by means of a `T' piece
(Zo=75 Ohms) to a 75 Ohm cable system with both
extremities terminated in 75 Ohms.
Under no circumstances should the "RollCall"
network be directly connected to any other
communications network such as a computer
"Ethernet" system.