background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

  

Foodprocessor

HR7730/80

05/01

PRODUCT INFORMATION

Features

-  Click & Go 

:  Easy assembly and dissasembly system

-  Powerful (700 W) 

:  Capable of handling even the toughest tasks.

-  Large bowl  (3,6 L dry, 1,8 L liquid capacity)  :  Capable of processing large batches at once.
-  Easy Clean button 

:  Easy cleaning of chopper bowl, which is also dishwasher safe.

-  2 speeds and pulse function 

:  Optimally adjusting the speed to the job.

-  Graphics on the appliance 

:  Quickly choosing the right accessory for the job.

-  Suction feet 

:  Keeping the appliance perfectly stable and safe during operation.

-  Cord Storage 

:  Adjusting the cord length to the specific situation.

Accessories

-  Stainless steel metal blade 

:  Chopping, blending, pureeing, and mixing of meat, fish, vegetables, dairy, 

 

  fruits and nuts.

-  Plastic insert holder 

:  Disc-shaped space-saving tool holder for different inserts.

-  Stainless steel slicing insert medium 

:  Slicing vegetables and fruits.

-  Stainless steel shredding insert medium 

:  Shredding vegetables, fruits and cheese.

-  Plastic kneading accessory 

:  Kneading all kinds of dough (up to 1,3 kg dough) and mixing cake batters 

 

  (up to 0,8 kg of batter).

-  Plastic emulsifying disc 

:  For all kinds of whipping, whisking and emulsifying jobs.

-  Citrus press 

:  For making large quantities (1,8L) of citrus juice in a short time.

-  Plastic pusher 

:  Pushing the ingredients in the bowl during the process.

 

  The pusher has a hole, so that oil can gradually be added.

Safety

-  Automatic resettable thermal cut off 

:  Protecting the motor against overheating.

-  Built-in safety lock 

:  Detects whether lid & bowl are assembled.

-  Brake system 

:  Stops the accessories within 1,5 seconds.

Summary of Contents for HR7730/80









Reviews: