Smiths Medical SurgiVet V3404 Plus Operation Manual Download Page 83

Page: 83 / 86

Appendix B: Revision History

Autocorr

Plus Operation Manual

B-1

REVISION

DATE

Rev. 10

May, 2007

CHANGES

Changed company logo and added manufacturer’s address to back cover.

Added patent and trademark information to table of contents.

Updated warranty statement.

Updated symbol chart in Chapter 1.

Changed some cautions and notes to warnings

Added AC power warnings.

Added warning to verify that all LEDs on the display light up upon startup startup of the device.

Added warning about incorrectly applied sensors.

Added photodynamic therapy warning.

Added warning about the oximeter displaying dashes or erroneous values under certain conditions.

Added caution about certain cleaning agents causing brittle plastic.

Added notes about alarm limits being retained through power cycles to Chapter 4.

Added note about testing the alarms while the monitor is in use.

Updated Pulse Oximetry Theory of Operation in Chapter 6.

Added paragraph about autocorrelation to Chapter 6.

Added notes about SpO

averaging.

Updated sensor chart in Chapter 6.

Updated sensor sections in Chapter 6.

Added Checking the Oximeter’s Performance section to chapter 6.

Updated Chapter 7 to include more information about the respiration parameter.

Updated Chapter 8 to include more information about the temperature parameter.

Added note about trend data being remembered at power down to Chapter 9.

Updated parts list in Chapter 14.

Updated ECG Input Impedance in Chapter 15.

Updated line art.

•

Appendix B: Revision History

Summary of Contents for SurgiVet V3404 Plus























































































Search results

Summary of Contents for SurgiVet V3404 Plus

Reviews:

Related manuals for SurgiVet V3404 Plus

Brands by name

Popular brands

Smiths Medical SurgiVet V3404 Plus, Operation Manual

Search results

Summary of Contents for SurgiVet V3404 Plus

Reviews:

Related manuals for SurgiVet V3404 Plus

Brands by name

Popular brands