Chapter 10: Serial Output
Operation Manual SurgiVet
®
V3404 Plus
10-3
Figure 9.3: Serial Out Menu, Trend Tables
To change the
PRINTER TYPE
:
Use the ARROW keys (
no
) to point to
PRINTER TYPE
, then press
b
.
Use the ARROW keys (
no
) to change the value to
RS-232
.
Press
b
to accept the selection.
When the output format has been chosen, set
START PRINT
to
YES
to enable the serial output.
Select
[EXIT]
or press
a
to exit menus. If serial output is in progress, exiting menus will not stop it.
To STOP serial output:
Select
SERIAL OUT
from the main menu.
Set
START PRINT
to
NO
.
NOTE: Serial output is always disabled when the monitor is powered off, then on, but the format and
times are remembered.
NOTE: If printing trend tables,
START PRINT
changes to
STOP PRINT
until all trend data is printed. When
all data is printed /sent,
STOP PRINT
changes to
START PRINT
.
1.
2.
3.
4.
5.
1.
2.
RR
/m
25
Q
Sp02 SENSOR!
STOP PRINT NO
NURSE CALL OFF
DATA FORMAT PATIENT DATA
INTERVAL EVERY 4 secs
PRINTER TYPE RS-232
[EXIT] (serial out menu)
n
