Chapter 10: Serial Output
10-4
Operation Manual SurgiVet
®
V3404 Plus
Serial Output Setup for Graphics Printer
The optional BCI
®
printer enables the user to print real-time strip charts of the patient’s activity. To setup printing
do the following:
Select
SERIAL OUT
from the Main Menu. If
STOP PRINT = NO
, then no serial output is currently in
progress, so proceed with step 2. Otherwise,
STOP PRINT = YES
and you must select
NO
to halt the current
output before the serial output data settings can be changed.
To change the data format (Patient Data or Trend Tables):
Use the ARROW keys (
no
) to point to the
DATA FORMAT
item, then press
b
.
Use the ARROW keys (
no
) to switch between formats. When the format changes, the menu item below it
changes.
Press
b
to accept the selection.
If
PATIENT DATA
is selected, the menu item displayed below it is:
INTERVAL
.
Figure 9.4: Serial Out Menu, Patient Data (BCI
®
Printer)
To change the output
INTERVAL
:
Use the ARROW keys (
no
) to point to
INTERVAL
, then press
b
.
Use the ARROW keys (
no
) to change the value.
Press
b
to accept the selection.
If
TREND TABLES
is selected, the menu item below it is:
PRINTER TYPE
.
Figure 9.5: Serial Out Menu, Trend Tables (BCI
®
Printer)
1.
2.
3.
4.
5.
1.
2.
3.
RR
/m
25
Q
STOP PRINT NO
NURSE CALL OFF
DATA FORMAT PATIENT DATA
INTERVAL EVERY 4 secs
PRINTER TYPE BCI PRINTER
SWEEP SPEED 25 mm/sec
[EXIT] (serial out menu)
n
RR
/m
25
Q
Sp02 SENSOR!
STOP PRINT NO
NURSE CALL OFF
DATA FORMAT TREND TABLES
PRINTER TYPE BCI PRINTER
SWEEP SPEED 25 mm/sec
[EXIT] (serial out menu)
n
