Chapter 2: Description of Measurements, Controls and Features
2-4
Operation Manual SurgiVet
®
V3404 Plus
keys
Figure 2.4: Keys
x
STANDBY/ON
Pressing
x
switches the monitor between ON (monitoring a patient) and STANDBY (monitor off, but power
is applied if the green indicator is lit.).
a
WAVE/TREND
This key controls the waveform area display. Press this key to display the ECG wave by itself, the
plethysmogram by itself, or both ECG and the oximeter’s plethysmogram, or a trend. Press
a
while menus
are displayed for a quick menu exit. The waveform or trend previously displayed will replace the menu.
B
ALARM SILENCE
Pressing
B
disables the audible alarm tone for two minutes. (The Alarm Silence indicator on the EL display
flashes.) Pressing and holding this key for about three seconds disables the alarm tone indefinitely. The
Alarm Silence indicator on the EL Display is lit and not flashing. The indicator appears with a slash through
it.) Pressing this key momentarily cancels either alarm silence condition.
The monitor defaults to two minute alarm silence at power up.
b
MENU/ENTER
Press this key to display the list of menus. While menus are displayed, press
b
to select a menu item or to
accept a value that has been adjusted.
o n
ARROWS
If a Menu is displayed, press the UP/DOWN ARROWS (
o n
) to move among menu items or to adjust
the value of a selected item. If a Trend is displayed, the ARROW (
o n
) keys cycle between trended
parameters.
j
RR
/m
25
4
5
2
3
1
4
2
3
5
1
