5 Adjustments
5-15
5.2.3 Related Parameters
The following table lists parameters related to this function and their possibility of being changed
while exe- cuting this function or of being changed automatically after executing this function.
- Parameters related to this function
These are parameters that are used or referenced when executing this function.
- Allowed changes during execution of this function
Yes : Parameters can be changed using S while this function is being executed.
No : Parameters cannot be changed using S while this function is being executed.
- Automatic changes after execution of this function
Yes : Parameter set values are automatically set or adjusted after execution of this function.
No : Parameter set values are not automatically set or adjusted after execution of this
function.
Parameter
Name
Mid-execution
changes
Automatic
changes
Pn170
Tuning-less Function Related Switch
No
Yes
Pn401
Torque Reference Filter Time Constant
No
Yes
Pn40C
2nd Notch Filter Frequency
No
Yes
Pn40D
2nd Notch Filter Q Value
No
Yes
Summary of Contents for LECYU Series
