SMC Networks LECYU Series, Operation Manual

Page: 41 / 250

2 P a n e l D i s p l a y a n d S
TM
2-3
2.2 Operation of S
TM
S is a setup software for setup and optimum DRIVER tuning of LECY series.
Please download the install program from our home page.
S
TM
is the registered trademarks of YASKAWA ELECTRIC Corporation.
2.2.1 Compatible Devices
- LECYM series
- LECYU series
2.2.2 Hardware requirements
When using setup software (S
TM
), use a DOS/V PC/AT compatible PC that meets the following
operating conditions.
Equipment Description
PC
*1 *2 *3
*4
OS
・
Windows® XP
*5
・
Windows® Vista
・
Windows® 7 (32 bit/ 64 bit)
Hard Disk
350 MB or more of free space
(When the software is installed, 400MB or more is empty
recommended.)
Communication
interface
Use USB port
Display
XVGA monitor (1024×768 or more, “The small font is used.”)
256 color or more (65536 color or more is recommended)
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer.
Printer Connectable with the above personal computer.
USB cable LEC-JZ-CVUSB
*6
Other Adobe Reader Ver.5.0 or more (
*
Ver.6.0 is excluded.)
*1. Windows, Windows Vista and Windows 7 are the registered trademarks of Microsoft Corporation in the
United States and other countries.
*2. On some personal computers, S may not run properly.
*3. 64-bit Windows® XP and 64-bit Windows® Vista are not supported.
*4. Use Windows® XP: Please use it by the administrator authority (When installing and using it.).
*5. In PC that uses the program to correct the problem of HotfixQ328310, it is likely to fail in the
installation. In that case, please use the program to correct the problem of HotfixQ329623.
*6. Order USB cable separately.
2.2.3 Installing S
TM
Program
To install S, run the setup file for S. And the installation process will begin. In this
process, S and the related files will be installed, or stored on the hard disk.
Operating conflicts may arise with the other programs during installation. Be sure to close all other
programs before installing S.
Install the program using the following procedure.