![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708380.webp)
C
OMMAND
L
INE
I
NTERFACE
4-108
• In “multi-host” mode, only one host connected to a port needs to pass
authentication for all other hosts to be granted network access.
Similarly, a port can become unauthorized for all hosts if one attached
host fails re-authentication or sends an EAPOL logoff message.
Example
dot1x re-authenticate
This command forces re-authentication on all ports or a specific interface.
Syntax
dot1x re-authenticate
[
interface
]
interface
ethernet
unit
/
port
-
unit
- Stack unit. (Range: 1-8)
-
port
- Port number. (Range: 1-24/48)
Command Mode
Privileged Exec
Example
dot1x re-authentication
This command enables periodic re-authentication globally for all ports.
Use the
no
form to disable re-authentication.
Syntax
[
no
]
dot1x re-authentication
Command Mode
Interface Configuration
Console(config)#interface eth 1/2
Console(config-if)#dot1x operation-mode multi-host max-count 10
Console(config-if)#
Console#dot1x re-authenticate
Console#
Summary of Contents for 8700S-130
