![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708162.webp)
C
ONFIGURING
THE
S
WITCH
3-106
•
Autonegotiation
(Port Capabilities)
– Allows auto-negotiation to be
enabled/disabled. When auto-negotiation is enabled, you need to
specify the capabilities to be advertised. When auto-negotiation is
disabled, you can force the settings for speed, mode, and flow control.
The following capabilities are supported.
-
10half
- Supports 10 Mbps half-duplex operation
-
10full
- Supports 10 Mbps full-duplex operation
-
100half
- Supports 100 Mbps half-duplex operation
-
100full
- Supports 100 Mbps full-duplex operation
-
1000full
- Supports 1000 Mbps full-duplex operation
- (Default: Autonegotiation enabled; Advertised capabilities for
RJ-45: 1000BASE-T – 10half, 10full, 100half, 100full, 1000full;
SFP: 1000BASE-SX/LX/ZX – 1000full)
•
Media Type
– Shows the forced/preferred port type to use for the
combination ports 21-24/45-48. (Default: SFP-Preferred-Auto)
-
Copper-Forced
- Always uses the built-in RJ-45 port.
-
SFP-Forced
- Always uses the SFP port (even if module is not
installed).
-
SFP-Preferred-Auto
- Uses SFP port if both combination types are
functioning and the SFP port has a valid link.
•
Trunk
– Indicates if a port is a member of a trunk. To create trunks
and select port members, see “Creating Trunk Groups” on page 3-107.
Note:
Auto-negotiation must be disabled before you can configure or
force the interface to use the Speed/Duplex Mode or Flow
Control options.
Summary of Contents for 8700S-130
