C
OMMAND
L
INE
I
NTERFACE
4-164
ip host
This command creates a static entry in the DNS table that maps a host
name to an IP address. Use the
no
form to remove an entry.
Syntax
[
no
]
ip host
name
address1
[
address2
…
address8
]
• name - Name of the host. (Range: 1-64 characters)
•
address1
- Corresponding IP address.
•
address2
…
address8
- Additional corresponding IP addresses.
Default Setting
No static entries
Command Mode
Global Configuration
Command Usage
Servers or other network devices may support one or more
connections via multiple IP addresses. If more than one IP address is
associated with a host name using this command, a DNS client can try
each address in succession, until it establishes a connection with the
target device.
show dns
Displays the configuration for DNS services PE
4-171
show dns cache
Displays entries in the DNS cache
PE
4-171
clear dns cache
Clears all entries from the DNS cache
PE
4-172
Table 4-44 DNS Commands
(Continued)
Command
Function
Mode Page
Summary of Contents for 8700S-130
