![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708134.webp)
C
ONFIGURING
THE
S
WITCH
3-78
The operation of 802.1X on the switch requires the following:
•
The switch must have an IP address assigned.
•
RADIUS authentication must be enabled on the switch and the IP
address of the RADIUS server specified.
•
Each switch port that will be used must be set to dot1x “Auto” mode.
•
Each client that needs to be authenticated must have dot1x client
software installed and properly configured.
•
The RADIUS server and 802.1X client support EAP. (The switch only
supports EAPOL in order to pass the EAP packets from the server to
the client.)
•
The RADIUS server and client also have to support the same EAP
authentication type. The current version of the firmware supports only
the EAP-MD5 authentication type. (Some clients have native support
in Windows, otherwise the dot1x client must support it.)
Displaying 802.1X Global Settings
The 802.1X protocol provides port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
•
802.1X System Authentication Control
– The global setting for
802.1X.
Web
– Click Security, 802.1X, Information.
Figure 3-36 802.1X Global Information
Summary of Contents for 8700S-130
