![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708292.webp)
C
OMMAND
L
INE
I
NTERFACE
4-20
silent-time
This command sets the amount of time the management console is
inaccessible after the number of unsuccessful logon attempts exceeds the
threshold set by the
password-thresh
command. Use the
no
form to
remove the silent time value.
Syntax
silent-time
[
seconds
]
no silent-time
seconds
- The number of seconds to disable console response.
(Range: 0-65535; 0: no silent-time)
Default Setting
The default value is no silent-time.
Command Mode
Line Configuration
Example
To set the silent time to 60 seconds, enter this command:
Related Commands
password-thresh (4-19)
databits
This command sets the number of data bits per character that are
interpreted and generated by the console port. Use the
no
form to restore
the default value.
Syntax
databits
{
7
|
8
}
no databits
• 7 - Seven data bits per character.
• 8 - Eight data bits per character.
Console(config-line)#silent-time 60
Console(config-line)#
Summary of Contents for 8700S-130
