![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708423.webp)
SNMP C
OMMANDS
4-151
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (4-150)
snmp-server host
This command specifies the recipient of a Simple Network Management
Protocol notification operation. Use the
no
form to remove the specified
host.
Syntax
snmp-server host
host-addr
community-string
[
version
{
1
|
2c | 3
{
auth
|
noauth
|
priv
}} [
udp-port
port
]]
no snmp-server host
host-addr
•
host-addr
- Internet address of the host (the targeted recipient).
(Maximum host addresses: 5 trap destination IP address entries)
•
community-string
- Password-like community string sent with the
notification operation to SNMP V1 and V2c hosts. Although you
can set this string using the
snmp-server host
command by itself,
we recommend that you define this string using the
snmp-server
community
command prior to using the
snmp-server host
command. (Maximum length: 32 characters)
•
version
- Specifies whether to send notifications as SNMP Version
1, 2c or 3 traps.
•
auth
|
noauth
|
priv
- This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy.
•
port
- Host UDP port to use. (Range: 1-65535; Default: 162)
Console(config)#snmp-server location WC-19
Console(config)#
Summary of Contents for 8700S-130
