![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708137.webp)
U
SER
A
UTHENTICATION
3-81
•
Max Request
– Sets the maximum number of times the switch port will
retransmit an EAP request packet to the client before it times out the
authentication session. (Range: 1-10; Default 2)
•
Quiet Period
– Sets the time that a switch port waits after the Max
Request count has been exceeded before attempting to acquire a new
client. (Range: 1-65535 seconds; Default: 60)
•
Re-authentication Period
– Sets the time period after which a
connected client must be re-authenticated.
(Range: 1-65535 seconds; Default: 3600)
•
Tx Period
– Sets the time period during an authentication session that
the switch waits before re-transmitting an EAP packet.
(Range: 1-65535 seconds; Default: 30)
•
Authorized
–
-
Yes
– Connected client is authorized.
-
No
– Connected client is not authorized.
-
Blank
– Displays nothing when dot1x is disabled on a port.
•
Supplicant
– Indicates the MAC address of a connected client.
•
Trunk
– Indicates if the port is configured as a trunk port.
Web
– Click Security, 802.1X, Port Configuration. Modify the parameters
required, and click Apply.
Figure 3-38 802.1X Port Configuration
Summary of Contents for 8700S-130
