![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708149.webp)
A
CCESS
C
ONTROL
L
ISTS
3-93
3. Permit all TCP packets from class C addresses 192.168.1.0 with the
TCP control code set to “SYN.”
Configuring a MAC ACL
Command Attributes
•
Action
– An ACL can contain all permit rules, deny rules, or a
combination of both. (Default: Permit rules)
•
Source/Destination Address Type
– Use “Any” to include all
possible addresses, “Host” to indicate a specific MAC address, or
“MAC” to specify an address range with the Address and Bitmask
fields. (Options: Any, Host, MAC; Default: Any)
•
Source/Destination MAC Address
– Source or destination MAC
address.
•
Source/Destination MAC Bit Mask
– Hexidecimal mask for source
or destination MAC address.
•
VID
– VLAN ID. (Range: 1-4093)
•
VID Bit Mask
– VLAN bitmask. (Range: 1-4093)
•
Ethernet Type
– This option can only be used to filter Ethernet II
formatted packets. (Range: 600-fff hex.)
A detailed listing of Ethernet protocol types can be found in RFC
1060. A few of the more common types include 0800 (IP), 0806 (ARP),
8137 (IPX).
•
Ethernet Type Bit Mask
– Protocol bitmask. (Range: 600-fff hex.)
Console(config-ext-acl)#permit 10.7.1.1 255.255.255.0 any
4-120
Console(config-ext-acl)#permit 192.168.1.0 255.255.255.0 any
destination-port 80
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
control-flag 2 2
Console(config-ext-acl)#
Summary of Contents for 8700S-130
