SMC Networks 8700S-130, Management Manual

Page: 383 / 592

A
UTHENTICATION
C
OMMANDS
4-111
• interface
• ethernet unit / port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
• 802.1X Port Summary – Displays the port access control parameters
for each interface that has enabled 802.1X, including the following
items:
- Status– Administrative state for port access control.
- Operation Mode–Allows single or multiple hosts (page 4-107).
- Mode– Dot1x port control mode (page 4-106).
- Authorized– Authorization status (yes or n/a - not authorized).
• 802.1X Port Details – Displays the port access control parameters
for each interface, including the following items:
- reauth-enabled – Periodic re-authentication (page 4-108).
- reauth-period – Time after which a connected client must be
re-authenticated (page 4-109).
- quiet-period – Time a port waits after Max Request Count is
exceeded before attempting to acquire a new client (page 4-109).
- tx-period – Time a port waits during authentication session
before re-transmitting EAP packet (page 4-110).
- supplicant-timeout – Supplicant timeout.
- server-timeout – Server timeout.
- reauth-max – Maximum number of reauthentication attempts.
- max-req – Maximum number of times a port will retransmit an
EAP request/identity packet to the client before it times out the
authentication session (page 4-106).
- Status – Authorization status (authorized or not).
- Operation Mode – Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
- Max Count – The maximum number of hosts allowed to access
this port (page 4-107).