![background image](http://html1.mh-extra.com/html/smc-networks/8700s-130/8700s-130_management-manual_1300708330.webp)
C
OMMAND
L
INE
I
NTERFACE
4-58
logging history
This command limits syslog messages saved to switch memory based on
severity. The
no
form returns the logging of syslog messages to the default
level.
Syntax
logging history
{
flash
|
ram
}
level
no logging history
{
flash
|
ram
}
•
flash
- Event history stored in flash memory (i.e., permanent
memory).
•
ram
- Event history stored in temporary RAM (i.e., memory
flushed on power reset).
•
level
- One of the levels listed below. Messages sent include the
selected level down to level 0. (Range: 0-7)
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Table 4-18 Logging Levels
Level Severity Name Description
7
debugging
Debugging messages
6
informational
Informational messages only
5
notifications
Normal but significant condition, such as cold
start
4
warnings
Warning conditions (e.g., return false,
unexpected return)
3
errors
Error conditions (e.g., invalid input, default
used)
2
critical
Critical conditions (e.g., memory allocation, or
free memory error - resource exhausted)
1
alerts
Immediate action needed
0
emergencies
System unusable
* There are only Level 2, 5 and 6 error messages for the current firmware release.
Summary of Contents for 8700S-130
