HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
61
of
68
14.3 CUMMINS QSM11 (IMPORT)
It is suitable for CM570 engine control module. Engine type is QSM11 G1, QSM11 G2.
Terminals of controller
C1 connector
Remark
Fuel relay output
5&8
Outside expand relay, when fuel
output, making port 5 and port 8 of
C1 be connected
Start relay output
-
Connect to starter coil directly
Terminals of controller
3 pins data link connector
Remark
CAN GND
C
CAN
communication
shielding
line(connect with ECU terminal
only)
CAN(H)
A
I
mpedance 120Ω connecting line is
recommended.
CAN(L)
B
Impedance 120Ω connecting line is
recommended.
Engine type: Cummins ISB
14.4 CUMMINS QSX15-CM570
It is suitable for CM570 engine control module. Engine type is QSX15.
Terminals of controller
50 pins connector
Remark
Fuel relay output
38
Oil spout switch
Start relay output
-
Connect to starter coil directly
Terminals of controller
9 pins connector
Remark
CAN GND
SAE J1939 shield-E
CAN
communication
shielding
line(connect with ECU terminal
only)
CAN(H)
SAE J1939 signal-C
I
mpedance 120Ω connecting line is
recommended.
CAN(L)
SAE J1939 return-D
Impedance 120Ω connecting line is
recommended.
Engine type: Cummins QSX15-CM570
