HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
17
of
68
4.4. MANUAL START/STOP OPERATION
1 Manual mode is selected by pressing the
button; a LED besides the button will
illuminate to confirm the operation; Then press
button to start the generator, it can
automatically judge crank success and accelerate to high speed running. If high
temperature, low oil pressure, over speed and abnormal voltage occur during genset
running, controller can effectively protect genset to stop (detail procedures please refer to
No.2~6 of Auto Start Sequence). If generator is normal, users can energize
“Gen Close
Relay” manually via
button or adjust engine speed manually via
button in
order to let the accumulator is charged.
2 Manual stop: pressing
key can shut down the running genset. (detail procedures
please refer to No.2~4 of
Auto Stop Sequence
)
NOTE: Manual start/stop operations are used for Test only.
