HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
7
of
68
2 PERFORMANCE AND CHARACTERISTICS
HGM7110DC
：
Control the genset to start/stop by detecting the accumulator voltage or
charger current.
With ARM-based 32-bit SCM, highly integrated hardware, new reliability level;
132x64 LCD with backlight, multilingual interface (including English, Chinese or other
languages) which can be chosen at the site, making commissioning convenient for
factory personnel;
Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;
Silicon rubber panel and pushbuttons for better operation in high/low temperature
environment;
RS485 communication port enables remote control, remote measuring, remote
communication via ModBus protocol.
Equipped with SMS (Short Message Service) function. When genset is alarming,
controller can send short messages via SMS automatically to max. 5 telephone numbers.
Besides, generator status can be controlled and checked using SMS.
Equipped with CANBUS port and can communicate with J1939 genset. Not only can you
monitoring frequently-used data (such as water temperature, oil pressure, speed, fuel
consumption and so on) of ECU machine, but also control starting up, shutdown , raising
speed and speed droop via CANBUS port.
Suitable for Accumulator Priority System, Generator Priority System, Or Double
Accumulator System;
Accumulator Priority System
：
The accumulator supplies the power for load continuously.
In Auto mode, the genset will start automatically to charger the accumulator if the
accumulator voltage has fallen below the
“Charge Start Voltage”.
Generator Priority System: The generator supplies the power for load continuously. If
there is shutdown alarm occurs by either engine or generator, the accumulator will supply
the power for load. In Auto mode, the genset will charge the accumulator if the
accumulator voltage has fallen below the
“Charge Start Voltage”; When the accumulator
voltage has fallen below the “Nominal Voltage”, in addition, the generator abnormal
condition occurs, Shutdown alarm will be initiated
Double Accumulator System: Firstly, the accumulator 1# supplies the power for load; if
the accumulator 1# satisfies the charger requirement, then it will charged by the genset
and the accumulator 2# supplies the power for load.
