C H A P T E R 1
About your interactive projector
3
smarttech.com/kb/170295
Projector boom
The projector is mounted to the wall by attaching the ball-joint to the
boom and the boom to the wall-mount plate. You can adjust the length
of the boom for different image sizes. It also includes the following
features:
l
Image sizes from 67" to 100" diagonal (16:10)
l
Image keystone, tilt and position
l
Image vibration dampening (typically induced from doors closing)
l
A padlock ring to prevent removal of the projector from the boom.
l
Templates and instructions for positioning the system safely.
See the
LightRaise interactive projectors installation guide
) for more
information on installing and positioning the projector boom.
Touch Detection Module (TDM)
The TDM mounts on the wall by attaching to the wall plate and enables your
system to differentiate between finger touch and pen touch. When it’s installed
and aligned, you can write with a pen and move objects with a finger at the
same time on the interactive surface.
The TDM provides a range of adjustments to accommodate varying projection
surface thicknesses. It also includes a conveniently placed multi-colored
status light that provides system status information feedback (see
See the
LightRaise installation guide
) for more information on installing
and aligning the TDM.
Curtain Alignment Tool (CAT)
The CAT is included with your projector purchase and enables you to align the
system during installation.
See the
LightRaise interactive projector installation guide
(
) for more information on using the CAT to align the system.
