C H A P T E R 6
Maintaining your projector
55
smarttech.com/kb/170295
To put the new lamp module into the projector
1. Remove the new lamp module from its packaging.
2. Carefully place the lamp module into the projector and gently press the power end of the lamp
module against the projector to ensure the power plug makes contact with the projector’s power
receptacle.
N O T E
You should be able to place the lamp module into the projector easily without applying much
force.
3. Use the Phillips screwdriver to secure the captive screws.
I M P O R T A N T
Do not over-tighten the screws.
4. Replace the lamp cover.
5. Use the Phillips screwdriver to secure the captive screws.
I M P O R T A N T
Do not over-tighten the screws.
6. Connect the power cable to the wall outlet.
7. Press the
Power
button once on the remote control or XCP to confirm that the projector is
operating and that the lamp module is correctly installed.
8. Put the old lamp module in a secure container, and handle it gently until you recycle it.
