A P P E N D I X C
Adjusting the interactive projector settings
111
smarttech.com/kb/170295
Setting
Use
Notes
VGA1 Speaker
Enables or disables the audio
output jack when using the VGA1
input.
HDMI Mic
Enables or disables the
microphone input jack when using
the HDMI input.
HDMI Speaker
Enables or disables the audio
output jack when using the HDMI
input.
Composite Mic
Enables or disables the
microphone input jack when using
the Composite input.
Composite Speaker
Enables or disables the Composite
input to the internal speaker.
Microphone Boost
Boost is applied in the
Off
setting.
The default is
On
(-20 dB). Keep
this setting on if your microphone
is too sensitive.
Change the setting to
Off
if you
want to apply Microphone Boost.
Exit
Closes the
Advanced Audio
sub-menu.
Operational Settings menu
Control Panel
Applies power to the DIN7, DIN4
and DB9 ports for XCP control
panel power.
The default is
Off
.
Auto Signal Detect
Enables or disables signal
searching of input connectors.
The default is
On
.
Select
On
to have the projector
continuously switch inputs until it
finds an active video source.
Select
Off
to manually select the
input source.
Lamp Reminder
Turns the lamp replacement
reminder
On
or
Off
.
The default is
On
. This reminder
appears 100 hours before the
recommended lamp replacement.
Lamp Mode
Adjusts lamp brightness to
Standard
or
Economy
.
The default is
Standard
, which
displays a high-quality, bright
image.
Economy
increases the lamp life
by decreasing the brightness of
the image.
