SMART LightRaise 60wi, User Manual

Page: 28 / 108

C H A P T E R 3
Using your interactive projector
20 smarttech.com/kb/170295
Setting Use Notes
Wall Color (displays the
color’s numeric value) Adjusts projector brightness and
color temperature based on these
wall colors:
Color 1: Blackboard
Color 2: Blue
Color 3: Light Green
Color 4: Pink
Color 5: Light Yellow
The default is Blackboard .
N O T E
This is equivalent to a
Whiteboard.
Keystone Adjusts image keystone distortions
caused by movement of the
projector. The default is 0 . The keystone
can be adjusted from -15 to 15.
I M P O R T A N T
Use this setting only after you
make all physical image
alignment adjustments to
straighten the vertical lines of
the image.
Brightness Adjusts projector brightness from 0
to 100. The default is 50 .
Contrast Adjusts the difference between the
lightest and darkest parts
of the image from 0 to 100. The default is 50 .
Saturation Adjusts the image from black and
white to saturated color from 0 to
100. The default is 50 .
Sharpness Adjusts projected image sharpness
from 0 to 31. The default is 16 .
Tint Adjusts the image color balance of
red and green from 0 to 100. The default is 50 .
Frequency Adjusts the display data frequency
of the projected image from -5 to 5
to match the frequency of your
computer’s graphics card. The default is 0 .
This setting applies to VGA
inputs only.
Tracking Synchronizes your projector’s
display timing with your computer’s
graphics card from 0 to 63. This setting applies to VGA
inputs only.