SMART LightRaise 60wi, User Manual

Page: 11 / 108

C H A P T E R 1
About your interactive projector
3 smarttech.com/kb/170295
Projector boom
The projector is mounted to the wall by attaching the ball-joint to the
boom and the boom to the wall-mount plate. You can adjust the length
of the boom for different image sizes. It also includes the following
features:
l
Image sizes from 67" to 100" diagonal (16:10)
l
Image keystone, tilt and position
l
Image vibration dampening (typically induced from doors closing)
l
A padlock ring to prevent removal of the projector from the boom.
l
Templates and instructions for positioning the system safely.
See the SLR 60wi installation guide ( smarttech.com/kb/170259 ) for more information on installing
and positioning the projector boom.
Touch Detection Module (TDM)
The TDM is mounts on the wall by attaching to the wall plate and enables your
system to differentiate between finger touch and pen touch. When it’s installed
and aligned, you can write with a pen and move objects with a finger at the
same time on the interactive surface.
The TDM provides a range of adjustments to accommodate varying projection surface thicknesses. It
also includes a conveniently placed multi-colored status light that provides system status information
feedback (see Determining touch status on page 57).
See the SLR 60wi installation guide ( smarttech.com/kb/170259 ) for more information on installing
and aligning the TDM.
Curtain Alignment Tool (CAT)
The CAT is included with your interactive projector purchase and enables you to
align the system during installation.
See the SLR 60wi installation guide ( smarttech.com/kb/170259 ) for more
information on using the CAT to align the system.