SMART LightRaise 60wi, User Manual

Page: 12 / 108

C H A P T E R 1
About your interactive projector
4 smarttech.com/kb/170295
Interactive touch and pen features
A computer vision-based SMART touch detection system tracks dual finger touch using an
infrared source, as well as dual interactive and synchronized infrared pen, on any reasonably
flat surface. This enables you to write or draw digital ink with the interactive pens or with your
fingers—up to two at a time. Because the projector is touch aware, you can even use one pen
to draw while simultaneously using your finger to manipulate content.
Features of the interactive pens include the following:
l
Active tip switch
l
Power switch
l
Pen automatically turns off when not in use to prolong battery life
l
One tri-colored status light: green (operational), amber (battery charging required), red (fault)
l
SoftTouch texture for improved finger grip
l
USB mini-B connection for battery charging
Pen holder
Store the interactive pens in the pen holder when you’re not using them and when you’re
charging them. The holder is also a convenient place to store the remote control.
USB charger
Charge your interactive pen with the included USB charger (see
Charging the interactive pen on page 32). A fully charged pen will
operate for two days before requiring recharging.
Remote control
The projector remote control enables you to access on-screen
projector menus, to change projector settings and to turn the
projector on and off.
See Using the remote control on page 18 for more information.