SMART LightRaise 60wi, User Manual

Page: 20 / 108

C H A P T E R 2
Installing your interactive projector
12 smarttech.com/kb/170295
Select an area with sufficient clearance to accommodate your interactive projector. For best
presentation alignment, mount your interactive projector in a location that’s central to your audience’s
viewing direction.
Choosing a height
The height of your projector depends on the size of the projected image and the available space for it.
If you have a dry-erase board as the projection surface, the height of the projector depends on the
width and height of the board. If the projection surface is a wall, the height of the projector depends on
the width and height of available wall space. Consider the general height of your user community and
ensure they’ll be able to touch all areas of the projected surface. When determining the size of the
projected image, ensure there is room to route the cables around the image and space to install the
pen holder.
To determine the height of the projector mounting bracket
1. Measure the width of the available surface space.
N O T E
o
Ensure the available width of the projection surface is equal to or greater than the width in
the table.
o
If you’re using a dry-erase whiteboard as the projection surface, measure inside the
frame.
2. Measure the height of the available surface space.
N O T E
o
Ensure the available height of the projection surface is equal to or greater than the height
in the table.
o
If you’re using a dry-erase board as the projection surface, measure inside the frame.