SMART Embedded Computing MC1600, Installation And Use Manual

Page: 19 / 126

Safety Notes
MC1600 Extreme Edge Server Installation and Use (6806870A02B) 19
Card Malfunctioning
Incorrect card installation and removal may result in card malfunction or damage the PCIe
slot. Ensure PCIe cards are properly seated.
Operation
System Overheating–Cooling Vents
Improper cooling can lead to card and system damage and may void the manufacturer’s
warranty.
To allow for proper cooling and undisturbed airflow through the system, always operate the
system in a horizontal position. Do not obstruct the ventilation openings at the front, rear,
or sides of the system. Keep the fresh air intake of the chassis completely clear. Make sure
that the fresh air supply is not mixed with hot exhaust from other devices.
Product Damage
High humidity and condensation on product surfaces causes short circuits.
Do not operate the system outside the specified environmental limits. Make sure the
system is completely dry and there is no moisture on any surface before applying power.
Do not start the system below 0°C unless it is an extended-temperature model.
Injury
Caution: The system may be equipped with multiple power feeds. All power connection
feeds must be disconnected to de-energize the system. To reduce the risk of personal
injury, disconnect the feeds when removing power from the system.
System Damage – Air Filters
Air contamination can pollute the air filter and obstruct the air intake of the system which
may cause system overheating and component damage.
To guarantee proper airflow through the system, replace the air filters (if equipped) at least
every six months. Artesyn recommends the air filters be replaced every 90 days.
Installations vary in physical location and cleanliness. Filter replacement may be required
more often in a dusty environment. Check air filters frequently after system installation to
determine how often they must be replaced. Establish a regular replacement schedule and
keep a log to record the date of each filter replacement.
Front Panel
The front panel, including the air filter (if equipped), is mounted to the system by alignment
pins and holding clips on both sides of the system. When mounting the front panel to the
shelf, align it accurately to avoid damage to the frame or front panel.