SMART Embedded Computing MC1600, Installation And Use Manual

Page: 18 / 126

18 MC1600 Extreme Edge Server Installation and Use (6806870A02B)
Safety Notes
Safety Notes
System Damage
During handling, shipping, and assembly, it is possible that pins, mounting screws, fans,
and other items became loose or damaged.
Do not operate a damaged system, as it may damage the devices that interface with the
system.
Personal Injury
High leakage current can be hazardous and cause injury.
Make an earth ground connection before connecting power to the system.
System Damage
Wrong jumper settings can make the system inoperable. Never change the settings of the
jumpers.
Card Installation
Damage of Circuits
Electrostatic discharge and incorrect product installation and removal can damage circuits
or shorten their life.
Before touching the product make sure that you are working in an ESD-safe environment.
Hold the product by its edges and do not touch any components or circuits.
Product Damage
Install PCI Express (PCIe) cards in the designated slots. Installing a card in the wrong slot
may cause card or system damage.
Installing or removing the card from the system while the system is powered up may
damage the card and the system.
When installing or removing the card from the system, power down the system first.
Data Loss
The MaxCore system does not support hot swap of PCIe cards. Before opening the top
cover of the system or before installing or removing any PCIe card, make sure the system
is powered off.
Disconnect the system from any AC or DC power or turn the system board power (payload
power) off through the Board Management Controller (BMC).
For more information, refer to the MC1600 Extreme Edge Server Installation and Use
manual.