SMART Embedded Computing MC1600, Installation And Use Manual

Page: 13 / 126

About this Manual
MC1600 Extreme Edge Server Installation and Use (6806870A02B) 13
Conventions
The following table describes the conventions used throughout this manual.
Notation Description
0x00000000
Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
0b0000
Same for binary numbers (digits are 0 and 1)
bold Used to emphasize a word
Screen
Used for on-screen output and code related elements or commands.
Sample of Programming used in a table (9pt)
C Bold
Used to characterize user input and to separate it from system output
Reference Used for references and for table and figure descriptions
File > Exit Notation for selecting a submenu
<text> Notation for variables and keys
[text]
Notation for software buttons to click on the screen and parameter
description
... Repeated item for example node 1, node 2, ..., node 12
.
.
.
Omission of information from example/command that is not necessary at
the time
..
Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used
in registers)
| Logical OR
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury
Indicates a hazardous situation which, if not avoided, may result in minor
or moderate injury