SMART Embedded Computing MC1600, Installation And Use Manual

Page: 104 / 126

104 MC1600 Extreme Edge Server Installation and Use (6806870A02B)
Software Configuration
Software Configuration
Show contents of CPLD firmware image:
Upgrade Operation
To upgrade CPLD, use the following command:
$ fcu –uf <CPLD image>.fri
Here,
<CPLD image>.fri
is the firmware file to which CPLD will be upgraded.
The following screen shows a typical output when the above command is executed.
After the system boots to Linux, to confirm the CPLD upgrade, execute the
fcu –q
command.
5.2.1.3 Broadcom Switch
The MC1600 contains a Broadcom BCM53402 8-port Ethernet switch. Each port supports
10GbE. The eight ports are connected as follows:
1 - Front panel SFP+, labeled ETH3 (BCM port xe0)
For the newly upgraded CPLD image to be active, you need to power cycle the
system.