SMART Embedded Computing MC1600, Installation And Use Manual

Page: 106 / 126

106 MC1600 Extreme Edge Server Installation and Use (6806870A02B)
Software Configuration
Software Configuration
Here is example output for the
ps
command on the Extreme Edge Server:
Notice the ports are labeled xe0 through xe7. The xe0-xe4 ports correspond to the SFP+
front panel ports labeled ETH 3 through 7. The connections to CPU1 & CPU2 are xe5 and
xe7. The BMC link is xe6.
If a (slower) 1G SFP module, copper or fabric, is inserted into any of the front panel SFP
ports, then the corresponding port must be reconfigured with auto-negotiation turned on,
using the BCM utility. For example, if a 1G SFP copper module is inserted in ETH 7 (xe4):
BCM.0> port xe4 autoneg=on
To capture statistic (packet) counters for a particular, or group of ports, use the
show
command. For example, the following command displays counters for ports xe5 & xe6:
BCM.0> show c xe5-xe6
To transmit dummy packets from a specific port, use the
tx
command. For example, the
following command transmits 1000 packets on port xe0, assuming the link is up:
BCM.0> tx 1000 pbm=xe0
To display the currently configured VLANs, use the
vlan show
command. For example:
BCM.0> vlan show
BCM.0 ps
port
ena/
link
speed
/dupl
ex
link
scan
auto
neg?
STP
state
pause discr
d
lrn
ops
inter
face
max
frame
loop
back
xe0(
2)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
xe1(
3)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
xe2(
4)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
xe3(
5)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
xe4(
6)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
xe5(
7)
up 10G
FD
HW Yes Forwar
d
TX RX None FA KR 16356
xe6(
8)
up 1G FD HW Yes Forwar
d
None FA KX 16356
xe7(
9)
down - HW Yes Forwar
d
TX RX None FA SGMII 16356
BCM.0>