94
ATCA-F140 Series Installation and Use (6806800M67S)
Functional Description
Functional Description
4.4
IPMI
The IPMI function of the ATCA-F140 is implemented using the SMART Embedded
Computing common ATCA base IPMI design. This building block is based on the Pigeon
Point Systems IPMI implementation using the Renesas HD64F2166 microcontroller which
is part of the H8S controller family. The IPMI building block implementation provides the
following features:
Two IPMB interfaces to the backplane
One local IPMB interface for on-board IPMI
One I
2
C/IPMB interface for intelligent or non-intelligent RTMs
One private I
2
C interface for non-intelligent I
2
C devices
Serial UART (SIPL) and KCS/LPC interfaces to the P2020 service processor
Analog voltage sensor inputs
Service processor boot flash fall over selection
Watch-dog timer
Hot swap control
Temperature sensors
