About this Manual
ATCA-F140 Series Installation and Use (6806800M67S)
15
Conventions
The following table describes the conventions used throughout this manual.
Notation
Description
0x00000000
Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
0b0000
Same for binary numbers (digits are 0 and 1)
bold
Used to emphasize a word
Screen
Used for on-screen output and code related elements or commands in
body text
C Bold
Used to characterize user input and to separate it from system output
Reference
Used for references and for table and figure descriptions
File > Exit
Notation for selecting a submenu
<text>
Notation for variables and keys
[text]
Notation for software buttons to click on the screen and parameter
description
...
Repeated item for example node 1, node 2, ..., node 12
.
.
.
Omission of information from example/command that is not necessary
at the time being
..
Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4
(used in registers)
|
Logical OR
Indicates a hazardous situation which could result in death or serious
injury
Indicates a hazardous situation which may result in minor or moderate
injury
