24
ATCA-F140 Series Installation and Use (6806800M67S)
Safety Notes
Safety Notes
AMC Module
Limitation of Operating Temperature Range
Installing AMC modules with small operating temperature ranges into the ATCA-F140 may
further restrict the operating temperature range of the ATCA-F140. Make sure that the
operating temperature of any installed AMC modules and the ATCA-F140 as a bundle are
within allowed limits.
Shelf Cooling and EMC Compliance Violation
An empty AMC bay may result in poor shelf cooling and strong EMC radiation and leads to
EMC compliance violation. Always cover empty or unused AMC bays with a filler panel.
Hot Swap
Data Loss
Wait until the blue LED is permanently illuminated before removing the product. Removing
the product with the blue LED still blinking causes data loss.
SFP/SFP+ Modules
Personal Injury and Damage of the RTM and SFP/SFP+ Modules
Installing and using SFP/SFP+ modules that are not fully certified and do not meet all
relevant safety standards may damage the RTM and the SFP/SFP+ modules and may lead
to personal injury.
Only use and install SFP/SFP+ modules that are fully certified and meet all relevant safety
standards.
Personal Injury
Optical SFP/SFP+ modules may be classified as laser products. When installing and using
any of these SFP/SFP+ modules the regulations which correspond to the respective laser
class apply to the whole RTM. Not complying to these regulations may lead to personal
injury.
When installing and using optical SFP/SFP+ modules which are classified as laser
products, make sure to comply to the respective regulations.
Eye Damage
Optical SFP/SFP+ modules may emit laser radiation when no cable is connected. This
laser radiation is harmful to your eyes. Do not look into the optical lens at any time.
