Sirona orthophos xg 3, Installation Instructions Manual

Page: 109 / 142

Sirona Dental Systems GmbH 11 Appendix
Installation Instructions ORTHOPHOS XG 3 11.2 Adjusting the panoramic X-ray unit
60 51 416 D 3352
D 3352.031.03.18.02
109
11.2.1Diaphragm/system adjustment menu
The DIAPHRAGM
/
SYSTEM ADJUSTMENT menu guides
you through the adjustment of the panoramic unit. This ser
-
vice routine is started from SIDEXIS XG :
U
TILITIES
C
ONSTANCY TEST XCXP
S
ELECT
X-
RAY DEVICE
S
ERVICE EXPOSURE
P
ASSWORD
INPUT
S
ELECT
X-
RAY COMPONENT
D
IAPHRAGM TEST EXPOSURE
IMPORTANT
The
DIAPHRAGM
/
SYSTEM ADJUSTMENT
menu is pass
-
word-protected. As password, enter the first four digits of
the current system date (PC) in reverse order.
Example: On 05/30/2004, the service password is 5003
IMPORTANT
The SELECT X
-
RAY DEVICE and SELECT X
-
RAY COMPO
-
NENT
dialogs appear only if several x-ray devices or x-ray
components are available for selection.
IMPORTANT
When you open the
DIAPHRAGM
/
SYSTEM ADJUSTMENT
menu, the unit switches from the user mode to the PC ser
-
vice mode logged by the PC. The service mode is indicated
by the SERVICE display on the Multipad ( 2. ).
In the PC service mode , the control options that are avail
-
able on the Multipad are determined by SIDEXIS and the
currently selected service routine. General control of the
unit by means of the Multipad (as in the user mode) is not
possible in this mode.
The
DIAPHRAGM
/
SYSTEM ADJUSTMENT
menu has
5 submenus:
• PAN - Sensor adjustment
• PAN - Diaphragm
• PAN - Symmetry
• PAN - Reset adjustment
• Sirona Service Sheet (for internal use only)
You can change between the individual submenus by click
-
ing the menu tabs with the mouse. To quit the DIA
-
PHRAGM
/
SYSTEM ADJUSTMENT menu, click CANCEL .
11.2Adjusting the panoramic X-ray unit
1.
2.
S E R V I C E