Sirona orthophos xg 3, Installation Instructions Manual

Page: 22 / 142

3 Installation: Panoramic X-ray unit Sirona Dental Systems GmbH
3.2 Required tools Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
22
D 3352.031.03.18.02
1. Masonry drill
–
Δια.
10mm (3/8“)
2. Impact drill or percussion drill
3. Torx offset screwdriver *
– TX10
– TX20
– TX25
4. Open-end wrench
– 13 mm A/F
5. Socket wrench
– Wrench insert 13
6. Hammer
7. Center punch
8. Spirit level
9. Additional requirements for installation with floor stand:
– Masonry drill
δια.
12mm (1/2“)
– Allen key 6 mm
– Socket wrench and extension
Wrench insert 17
* included in the scope of supply
Required measuring instruments
• Multimeter or ammeter (battery-operated)
• Test unit for device leakage current measurement ,
e.g. Bender tester or line-frequency, high-resistance
measurement voltage source (isolation transformer)
and measuring circuit (MD) that meets the require
-
ments of IEC 60 601-1.
• Power source for protective ground wire test
Technical data:
– No-load voltage of at least 4V - maximally 24V
– Short-circuit current at least 0.2A
3.2 Required tools
1.
2.
3.
7. 4.
5.
6.
8.
9.