Sirona orthophos xg 3, Installation Instructions Manual

Page: 71 / 142

Sirona Dental Systems GmbH 7 Initial startup
Installation Instructions ORTHOPHOS XG 3 7.4 Checking the data paths
60 51 416 D 3352
D 3352.031.03.18.02
71
6. Take an exposure:
– Press the R key on the Multipad to move the unit
back to the starting position.
– Press the release button. Hold down the button
until the exposure has been completed.
IMPORTANT
A service message box indicates whether the generated
test image is correct. Acknowledge this message with
OK .
The test image is displayed on the screen.
7. Test pattern for panoramic unit
Check the images according to the following criteria:
– Tile structure of the existing segments
Tip: To facilitate checking, you can adjust the image con
-
trast and brightness in SIDEXIS.
– Linear grayscale gradient
– Intensity steps clearly recognizable
– No image artifacts detectable
7.
6.
T R
Prog.
S
kV mA
G