Sirona orthophos xg 3, Installation Instructions Manual

Page: 103 / 142

Sirona Dental Systems GmbH 11 Appendix
Installation Instructions ORTHOPHOS XG 3 11.1 Service routines (for installation)
60 51 416 D 3352
D 3352.031.03.18.02
103
11.1.5Configuring the system version (S017.2)
• Select service routine S017.2 with security access (see
section 11.1.3 and 11.1.4).
Following selection, the ID of the currently selected sys
-
tem version appears in selection field 1.
1. Select the desired system version 0081 using the arrow
keys of selection field 1 and confirm your selection by
pressing the Service key .
0081 = ORTHOPHOS XG 3 (fixed diapraghm)
After the selection of the system version, the LED
above the
Memory key lights up.
To save the selected system version, first press the Me
-
mory key (the LED above the R key lights up) and
then the R key .
IMPORTANT
The set value is permanently saved as the relevant system
version.
2. Check the jumper settings of sockets 306, 309 and 503
on board DX1.
0081 = Jumpers in inner position
• Quit service routine S017
(see page 101).
• Switch the unit OFF and restart it.
After the restart, the selected system version is active.
1.
T R
Prog.
S
kV mA
T R
Prog.
S
kV mA
0 0 8 1
➊
➋
0 0 8 1
➌
2.
Jumper inside
0081 = ORTHOPHOS XG 3
Jumper inside
Sleeve Sleeve
Sleeve
R