Simrad TV80, Reference Manual

Page: 119 / 306

406388/B
117
two. If you wish to make more than two measurements with your sensor, an additional
license is required. Remote functions are not considered a measurement.
10 Choose the communication channel.
This is specially important if you wish to use several sensors to operate on different
communication channels. This is also important to avoid interference if several vessels
equipped with identical catch monitoring systems are operating simultaneously in
the same area. For more details, see
Overview of sensors channels and frequencies,
page 269
11 Calibrate the sensor.
When the sensor is mounted on the trawl, you should enter the following values in the
Door Installation Offsets
: Roll 0, Pitch 0, Yaw 0.
12 Select
Program Sensor
.
The currently selected parameters are “sent” to the sensor.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236
Main PX Sensors configuration parameters, page 264
Specific configuration parameters for PX TrawlEye sensors, page 267
Overview of sensors channels and frequencies, page 269
Operating procedures