Simrad TV80, Reference Manual

Page: 59 / 306

406388/B
57
You can also use the request form on http://www.simrad.com/support , or contact our
support department directly. You can use the following e-mail address:
• purchase.order@simrad.com
Once the software license string(s) have been returned to you (most likely by e-mail), you
can install the licenses into the software.
5 On the Processor Unit desktop, double-click the TV80 icon to start the program.
6 Observe that the
Activation
dialog box opens.
7 Copy the license string into the text field provided.
8 Select
Activate
to start the TV80 program.
Setting up the SR15 Receiver Unit on an Ethernet (LAN) port
The SR15 Receiver Unit allows you to receive information from the PX catch monitoring
sensors: PX MultiSensor mk2, PX MultiCatch and PX TrawlEye. The Receiver Unit must
be connected to the Processor Unit using an Ethernet line.
Prerequisites
In order to connect a catch sensor to the TV80 system, the following requirements must be
met.
• The TV80 software is installed on the Processor Unit.
• The license string for the software is installed and activated.
• One or more receivers are available for connection to the TV80.
Context
The SR15 Receiver Unit comprises a rugged box providing all necessary receiver electronics.
The receiver is designed for low noise, and it can handle input signals spanning a very large
instantaneous dynamic amplitude range. All targets are correctly measured and displayed.
The SR15 Receiver Unit allows you to connect one single hydrophone. Depending on
your fishing requirements, you may need to install more than one hydrophone to receive
the information from the catch sensors. With a single channel receiver, you must manually
switch between the hydrophones to check which hydrophone that provides the best
communication.
Procedure
1 Open the
Setup
menu.
Getting started