406388/B
105
Procedure
1
Open the
Setup
menu.
2
On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3
At the bottom of the
Sensor list
page, select
Add New Sensor
.
The
Add New Sensor
dialog box opens.
4
Select
No
if the sensor is mounted on the fishing gear, if it is a PI/ITI type sensor or if
the sensor data is received via the FS cable based system and you still need to configure
the system and the receiver.
5
In the next dialog box, select the type of sensor you want to add.
6
Observe that the
Select Sensors
dialog box opens.
7
Select the measurements you wish to make with the new sensor, and place it on the gear.
8
Define the sensor parameters.
9
Select
Save and Close
to save your choices and close the dialog box.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 227
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236
Summary of Contents for TV80
