Simrad TV80, Reference Manual

Page: 174 / 306

172
406388/B
Context
You can choose which measurement and from which sensor is going to be presented by a
selected gauge. The TV80 will automatically show which measurements are available for
that specific gauge. In some cases, you can select to see the value received straight from the
sensor or the calculated value indicating the difference between two measurements.
Procedure
1 Right click on a selected gauge in your active view.
The Gauge shortcut menu opens.
2 Select
Properties
.
The
Edit Gauge
dialog box opens.
3 From the
Measurement
list, select one of the available options.
The options will change depending on the sensors installed and the gauge itself.
4 Select
OK
to save the chosen setting and close the dialog box.
Result
The selected gauge shows the measurement from the chosen sensor.
Further requirements
In order to see a calculated value indicating the difference
between two measurements, repeat the same procedure
and select the measurement accordingly.
Related topics
Opening the Designer module, page 167
Gauges dialog box, page 181
Edit Gauge dialog box, page 183
Simrad TV80 Reference Manual