Simrad TV80, Reference Manual

Page: 109 / 306

406388/B
107
4 Select
Yes
.
5 In the
PX Sensor Configurator
dialog box, select communication port and sensor type,
then select
Connect
.
a In the relevant configuration dialog box, select the operational parameters to suit
your preferences and fishing gear setup.
b Select
Program Sensor
to transfer the chosen parameters to the sensor.
c Disconnect the sensor from the interface cable and the Processor Unit.
d Select
Close
to close the dialog box.
6 Observe that the
Select Sensors
dialog box opens.
7 Select the measurements you wish to make with the new sensor, and place it on the gear.
8 Define the sensor parameters.
9 Select
Save and Close
to save your choices and close the dialog box.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 227
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236
Operating procedures