Simplex 4007ES Panels, Programmer'S Manual

Page: 65 / 168

7-9
4007ES Panel Programmer Manual ( 579-1167)
Point Editing for TrueAlert Device, Continued
TrueAlert ES AV-H
Appliance Point
Editing Use this device type to edit TrueAlert ES Audible/Visual High Candela (AV-H) appliances. The
following editing options are available for this appliance:
Table 7-7.TrueAlert ES AV-H Point Editing Options
Option Description
Custom Label This field can be used to describe the appliance's function, location, or other
descriptive information.
Alternate Label This field is used to enter an alternative description of the appliance.
Style Select the Style that corresponds to the appliance or device you are programming.
• Indoor.
• Available candela
options:
System Default. Selecting this option sets the candela value
to the one selected in the System Option tab.
110 candela
135 candela
185 candela
Hardware. Selecting this option sets the appliance to the
setting indicated on the appliance's configuration switch or
jumper.
Operation Select the type of operation the appliance will signal.
General Evac. The strobe is automatically associated with the “ALL VISUAL”
VNAC by default. The “alarm/alert” switch on the device must
be set to "Alarm".
Other When this mode is selected the user is confirming that the
strobe does not have a default assignation to a particular
VNAC and that the VNAC must be specified by the user.
Mounting Only a ceiling-mounted appliance is allowed
Candela Select the candela output of the appliance. The selection varies according to the
appliance style.
Horn Type Broadband Multitone
Tone BROADBAND BROADBAND, 520 HZ, BELL, SLOW WHOOP, SIREN,
HILO, CHIME, HARDWARE
Continued on next page.