Simplex 4007ES Panels, Programmer'S Manual

Page: 129 / 168

10-7
4007ES Panel Programmer Manual ( 579-1167)
IP File Transfer, Continued
Download Tab 1. To download a software feature, make sure the Service Mode (Jumper 7) is enabled.
Select the type of file you want to download by clicking on the radio button next to the file
you want to download. The options are:
• CFIG and all Execs
• CFIG
• Slave Exec
• Panel Exec
• CPU Bootloader
• Primary Msglib
• Alternate Msglib
2. Once the selection has been made, use the checkboxes to select the download options:
• Download to a running panel : Select this option to download the file to a running
panel. Once this option is selected, there are 3 ways in which the changes can be
applied:
- Automatically after the download. Select the "Apply download changes after
download" box to have the downloaded changes applied immediately after the
download. This is the program’s default setting.
- When the system reboots: If the "Apply download changes after download" button is
not selected, the downloaded changes will be saved and applied once the system is
rebooted.
• Exclude the recovery file. This box option can be used when downloading a CFIG, it
will result in a faster download.
• Preserve current Install mode list : Select this box to keep all the points you have
placed in install mode in install mode once downloaded changes have been applied.
This is highly recommended.
3. Use the File name box to select the file you want to download to the panel.
4. Click on the
Download button to start the process.
The following are additional functions accessible from the Download tab:
•
View Final Status of Last Panel Update: Click on this button to bring up the final status of
the last panel update.
IMPORTANT: Selecting the CFIG and All Execs option makes it possible for the
IP Transfer to download the correct panel bootloader, panel UI slave
and other slaves to the panel, in addition to the job.