Simplex 4007ES Panels, Programmer'S Manual

Page: 124 / 168

10-2
4007ES Panel Programmer Manual ( 579-1167)
USB File Transfer
USB File Transfer To Upgrade Software using a USB Storage Device:
1. Insert the USB storage device into the 4007ES Panel and upload the job currently running on
the panel. The job is uploaded into a zip folder. The USB storage device must be formatted
with FAT32 file system.
2. Take the USB storage device out of the panel and insert it in the PC.
3. Unzip the job and open it using the same version of the Programmer as the Master .BIN file
running in the panel. For example, if 4007_3.02.03.bin is the file in the panel, then
Programmer version 3.02.04 must be used.
Note: To check which Master BIN file is running in the panel, press the Menu button on the panel, then
browse to System Info and then to Software Revisions . The Master BIN file version appears on
the 4007ES panel display and it is different from the 4100ES and 4010ES.BIN files.
4. Save the job, build it, and then re-open it using the most recent version of the Programmer.
5. Click on the Transfer menu option and then on USB .
6. In the USB Transfer window (Figure 10-1), click CFIG , Panel Exec and Include Binary
Files checkboxes and make sure the files are attached.
Note: Selecting the Panel Exec and Include Binary Files makes it possible for the USB transfer to
select the correct panel bootloader, kernel, file system, panel UI slave and other listed slaves in the
compatibility file (on the USB key /bins/compatibility.xml).
Figure 10-1. USB Transfer Window
7. Select the appropriate mass storage device and click on the Download button to download
the files to the USB storage device. If older files are detected, the Overwrite Files dialog
box appears. Click on the Yes button to replace the old files with the new ones.
Continued on next page